17 Top Diecast Metal Models

 

Douglas A-4 A-4F Skyhawk - USS Hancock 172 Scale Diecast Metal Model

Douglas A-4 (A-4F) Skyhawk – USS Hancock 1/72 Scale Diecast Metal Model

Douglas A-4 (A-4F) Skyhawk – USS Hancock 1/72 Scale Diecast Metal Model - There is also an additional external fuel tank to be attached to the fuselage. If you have small kids that like to play with your models, save yourself some frustration (and money) and wait till later to get a model like this one. The cockpit can open and close, but one needs to be very careful not to damage it or break it. This model is a single seat and includes one pilot figure. It is mostly metal and very heavy. Moreover, the conventional bombs pylons shown in the photos can be replaced by air to air missiles. 5″. There is a stand included. The box is labeled as not suitable for children under 14. Va-55, uss hancock, vietnam 1972. It also includes a pair of missiles and external fuel tanks to be attached to the wings. It does includes a detailed landing gear as well as the cover of the wheel wells to give the appearance of in-flight. It also has a number of antennas which look great but are very fragile. This is really a “no-play” model or a “display-only” model. 172 scale metal die-cast, douglass a-4f skyhawk, length 6. 75″ wingspan 4.

 

Consolidated B-24 Liberator - Witchcraft - 1163 Scale Diecast Metal Model

Consolidated B-24 Liberator – Witchcraft – 1/163 Scale Diecast Metal Model

Consolidated B-24 Liberator – Witchcraft – 1/163 Scale Diecast Metal Model - 5″ wingspan 8″ this b-24 model is made to be displayed in the inflight configuration, there is no option for a landing gear. 1163 scale diecast metal, consolidated b-24 liberator, length 4. The maker of the model, model power, really did a good job with the model, the panel lines and details are very clear and crisp. It is certainly not a toy and will not survive been played with or a fall. Although it is a small scale, the details are very impressive. Since there is no option for a landing gear, a stand where the model can be attached for display is included and the model’s info (type of airplane and scale). It is mostly made of metal and very heavy/dense. If one blows onto the front of the plane, all four propellers start spinning. It has many guns and antennas sticking out and these are very fragile. From the photos one can see and appreciate the transparent cockpit windshield, as well as the other transparent parts in the different gun positions and view ports. Even the tail gun positions looks accurate and have gun barrels sticking out. Look at the photos and you will see very clear and crisp nose art and markings. The propellers are free to rotate and very smooth. What really caught my attention, however, is the way the markings and coloring.

 

F-4 F-4B Phantom II - Sundowners - USS Coral Sea -1155 Scale Diecast Metal Model

F-4 (F-4B) Phantom II – Sundowners – USS Coral Sea -1/155 Scale Diecast Metal Model

F-4 (F-4B) Phantom II – Sundowners – USS Coral Sea -1/155 Scale Diecast Metal Model - . It is mostly made of metal and very heavy/dense. 5″ wingspan 3″ this phantom ii model is made to be displayed in the inflight configuration. It is certainly not a toy and will not survive been played with or a fall. 1155 scale diecast metal, mcdonnell douglass f-4 phantom ii, sundowners, uss coral sea, length 4.

 

Mikoyan-Gurevich MiG-21 Fishbed 172 Scale Diecast Metal Model

Mikoyan-Gurevich MiG-21 Fishbed 1/72 Scale Diecast Metal Model

Mikoyan-Gurevich MiG-21 Fishbed 1/72 Scale Diecast Metal Model - The canopy is not movable, instead there are two sets of canopies, one in the opened position and one in the closed position. It also has a number of antennas which look great but are very fragile. This is really a “no-play” model or a “display-only” model. If you have small kids that like to play with your models, save yourself some frustration (and money) and wait till later to get a model like this one. 5 inches by 8. It is mostly metal and very heavy. 5 inches by 3. This model comes with a pair of air to air missiles for the wings and an optional pod cannon and fuel tank for the center line. This model represents a mig-21 from north korea. 25″ wingspan 4″ this model is a single seat and includes a pilot figures. The box measures 8. The box is labeled as not suitable for children under 14. There is a stand included. It does includes a detailed landing gear as well as the covers of the wheel wells to give the appearance of in-flight. 5 inches. 172 scale metal diecast, mikoyan-gurevich mig-21- north korea, length 8.

 

Toyota Tundra 136 Scale Diecast Metal Model by Kingstoy - WHITE

Toyota Tundra 1/36 Scale Diecast Metal Model by Kingstoy – WHITE

Toyota Tundra 1/36 Scale Diecast Metal Model by Kingstoy – WHITE - Moreover the back wheels have pull back action, which means that it will wind up when you pull it back and it will roll if you let it go. 25 inches high. At 1/36 scale these models are about the size of a regular computer mouse. These are very realistic models. The hood and tail gate can open. 25 inches wide by about 2. These models don’t sacrifice on detail or quality to size. The doors can open revealing nice interior details such as accurate seats, steering wheel, and instrument panel. The coloring is done is high gloss finish with accurate markings and branding. They do not have individual boxes. The detail and accuracy of the model is very impressive. 25 inches long by about 2. The wheels are free rolling and made of rubber. The rolling motion is very smooth so be mindful of where you display it (or chuck the wheels). The 2014 toyota tundra at 1/36 scale by kingstoy measures about 6. It has very nice details such as separate clear plastic headlights, taillights, grill, turn signals, etc. These models come is a big display box. They will be expertly packed and shipped.

 

German Battleship Tirpitz 11250 Scale Diecast Metal Model Ship

German Battleship Tirpitz 1/1250 Scale Diecast Metal Model Ship

German Battleship Tirpitz 1/1250 Scale Diecast Metal Model Ship - 1/1250 scale german kriegsmarine battleship tirpitz length 7. 25″ by 2″ by 4″. They are constructed of diecast metal and plastic parts. They are very fragile and will not last long if played with. These models are made for display and are not really toys. 125″ the collection of world war ii warships from atlas at 1/1250 scale come already assembled and painted. 75″. There is no assembly or painting needed. The base of the stand measures 4. 75″, width 1. The recommended age is 14 years and older. Each ship is attached to a removable display stand and each display stand has a metal nameplate. 75″ by 1. The models come packaged inside a plastic shell and this in turn is inside a cardboard box measuring 10. They have no moving parts.

 

German Battleship Scharnhorst 11100 Scale Diecast Metal Model Ship

German Battleship Scharnhorst 1/1100 Scale Diecast Metal Model Ship

German Battleship Scharnhorst 1/1100 Scale Diecast Metal Model Ship - 1/1100 scale battleship scharnhorst length 8. Heavy-duty metal construction with finely molded plastic detail parts. Warships of the world collection from eaglemoss is a breakthrough for both military and maritime enthusiasts. A removable, customized display stand with the ship’s name (in japanese) and year. Each has details and features that even the most discriminating collectors will appreciate a consistent 11100 scale that makes for a stunning display, with each ship visually comparable to all the others in the collection. Accurate colors and markings, from anti-fouling paint on the hulls to camouflage patterns, national insignia (including roundels on aircraft), and even runway markings. Textured surfaces that simulate wooden decks, intricate ironwork, chains and cleats. 5″, width 1″ these models come already assembled and painted out of the box. There is nothing to do or needed other than take them out of the packaging and display them. Miniature aircraft with cranes, detailed guns with blast bags, and a complete superstructure. .

 

1963 Volkswagen VW T1 Type 2 Bus 124 Scale Diecast Metals Model - GREEN

1963 Volkswagen (VW) T1 (Type 2) Bus 1/24 Scale Diecast Metals Model – GREEN

1963 Volkswagen (VW) T1 (Type 2) Bus 1/24 Scale Diecast Metals Model – GREEN - The seats/benches inside are visible and molded quite accurately. 75″ long, 2. 75″ wide and 3″ high. It has openable passenger door & rear hatch. So they will be shipped wrapped in bubble wrap and packing material (they will be better protected than an in an individual window box). Hub cabs have the vw logo embossed and the tires are made of rubber. The models we have are the ones that come in a display tray box of 4 models per box (the type of box that would be on a counter in a store). These are not the models that come in individual window box. This 1962 vw bus measures 6. The headlights, taillights, turn signals, side view mirrors and chrome bumpers add nice and realistic details.

 

IJN Battleship Yamato 11250 Scale Diecast Metal Model Ship

IJN Battleship Yamato 1/1250 Scale Diecast Metal Model Ship

IJN Battleship Yamato 1/1250 Scale Diecast Metal Model Ship - The recommended age is 14 years and older. They have no moving parts. 1/1250 scale imperial japanese navy battleship yamato length 8″, width 1. The base of the stand measures 4. 75″. They are very fragile and will not last long if played with. These models are made for display and are not really toys. 75″ by 1. Each ship is attached to a removable display stand and each display stand has a metal nameplate. 25″ by 2″ by 4″. They are constructed of diecast metal and plastic parts. 25″ the collection of world war ii warships from atlas at 1/1250 scale come already assembled and painted. There is no assembly or painting needed. The models come packaged inside a plastic shell and this in turn is inside a cardboard box measuring 10.

 

F-86 Sabre - Mig Mad Marine - 1110 Scale Diecast Metal Model

F-86 Sabre – Mig Mad Marine – 1/110 Scale Diecast Metal Model

F-86 Sabre – Mig Mad Marine – 1/110 Scale Diecast Metal Model - 1110 scale diecast metal, f-18 sabre, mig mad marine, length 4″ wingspan 4. Although it is a small scale, the details are very impressive. 125″ this sabre model is made to be displayed in the inflight configuration. It is mostly made of metal and very heavy/dense. There are very few gaps and/or joints in this model. The box is labeled as adult collectible model and recommends 14 and older. It is certainly not a toy and will not survive been played with or a fall. Since there is no option for a landing gear, a stand where the model can be attached for display is included and the model’s info (type of airplane and scale). Look at the photos and you will see very clear and crisp nose art and markings. From the photos one can see and appreciate the transparent cockpit windshield. The maker of the model, model power, really did a good job with the model, the panel lines and details are very clear and crisp. What really caught my attention, however, is the way the markings and coloring.

 

Chevrolet Corvette Z06 2007 124 Scale Diecast Metal Model - RED

Chevrolet Corvette Z06 (2007) 1/24 Scale Diecast Metal Model – RED

Chevrolet Corvette Z06 (2007) 1/24 Scale Diecast Metal Model – RED - Doors can open to reveal a very detailed and accurate interior with some touches of color on parts such as seats, seat belt buckles and even on the instrument panel. Welly does very high quality models and this one is not the exception. Headlights, taillights and turn signals are made of separate plastic pieces which makes the whole model look very realistic. This model of the corvette is about 7. They will be expertly (for real, i am the one who does it) packed for shipping (they will be better protected than an in an individual window box). 25 inches long, 3 inches wide and 2. The engine compartment can be opened and the engine is nicely represented. The models we have are the ones that come in a display tray box of 4 models per box (the type of box that would be on a counter in a store). It is highly detailed, with beautiful body paint and accurate markings. Moreover, side mirrors are also made of separate pieces. These are not the models that come in individual window box. 25 inches high.

 

Boeing AH-64 Apache Longbow US Army 1100 Scale Diecast Metal Model

Boeing AH-64 Apache Longbow US Army 1/100 Scale Diecast Metal Model

Boeing AH-64 Apache Longbow US Army 1/100 Scale Diecast Metal Model - 75″ wingspan 5. 75″ this apache model is mostly made of metal and very heavy/dense. Although it is a small scale, the details are very impressive. The maker of the model, model power, really did a good job with the model, the panel lines and details are very clear and crisp. From the photos one can see and appreciate the transparent cockpit windshield. What really caught my attention, however, is the way the markings and coloring. It has guns, weapons and antennas sticking out and these are very fragile. A stand where the model can be attached for display is included and the model’s info (type of airplane and scale). It is certainly not a toy and will not survive been played with or a fall. Look at the photos and you will see very clear and crisp nose art and markings. 1100 scale diecast metal, boeing ah-64d apache longbow helicopter us army, length (fuselage) 5. The propellers are free to rotate and very smooth. The model can also be displayed on its skies.

 

CAT CT660 777G and 980K Set of 3 Vehicles Scale Diecast Metal Models

CAT CT660, 777G and 980K (Set of 3 Vehicles) Scale Diecast Metal Models

CAT CT660, 777G and 980K (Set of 3 Vehicles) Scale Diecast Metal Models - 5″ long. These models are quite small and are not suitable for young children (younger than 3 years old) due to choking hazard. They are made to fit within the base which measures 5″ x 2. The base is made of hard cardboard which folds into a base. These are really not toys and they come attached to the base by a tiny screw. The base has the model’s info and a stone pattern printed on it. The model is attached to the base by a tiny screw. These models are not made in a common scale. The package recommends ages 8+., 980k wheel loader at 1/94 scale. 5″. 5″ long., 777g dump truck at 1/98 scale measuring 3. This posting is for a set of 3 cat vehicles from the earth movers series from toy state the set consists of, ct cement mixer truck at 1/92 scale measuring 3. 5″ think. The 980k wheel loader model measures 4″ long from the rear bumper to the front of the scoop. The model can be separated from the base. The model comes packaged in a blister pack.

 

Space Shuttle Discovery 1300 Scale Diecast Metal Model

Space Shuttle Discovery 1/300 Scale Diecast Metal Model

Space Shuttle Discovery 1/300 Scale Diecast Metal Model - 125″ this space shuttle model is made of metal and very heavy/dense. Also that because this model is mostly metal, that it is quite dense and will not survive if dropped and if handled carelessly. A stand where the model can be attached for display is included and the model’s info (type of airplane and scale). Moreover, the paint scheme and coloring is really well done. Small details and markings can be seen very clearly. Please notice the scale, at 1/300 scale this model is quite small measuring about 5 inches long and 3 inches wide of wingspan. The maker of the model, model power, really did a good job with the model, the panel lines and details are very clear and crisp. The landing gear fixed in the extended position. Although it is a small scale, the details are very impressive. 1300 scale diecast metal, space shuttle discovery, length 5″ wingspan 3. This is definitely not a toy, although it is sized as one. It is certainly not a toy and will not survive been played with or a fall. The box is labeled as not recommended for children under 14.

 

Dodge Ram 1500 144 Scale Diecast Metal Model - GREEN

Dodge Ram 1500 1/44 Scale Diecast Metal Model – GREEN

Dodge Ram 1500 1/44 Scale Diecast Metal Model – GREEN - Moreover the back wheels have pull back action, which means that it will wind up when you pull it back and it will roll if you let it go. The detail and accuracy of the model is very impressive. These models don’t sacrifice on detail or quality to size. They will be expertly packed and shipped. The wheels are free rolling and made of rubber. The doors can open revealing nice interior details such as accurate seats, steering wheel, and instrument panel. These are very realistic models. It has very nice details such as separate clear plastic headlights. They do not have individual boxes. At 1/44 scale these models are about the size of a regular computer mouse. The dodge ram 1500 at 1/44 scale by kinsmart measures about 5 inches long by about 2 inches wide by about 2 inches high. The rolling motion is very smooth so be mindful of where you display it (or chuck the wheels). These models come is a big display box. The coloring is done is high gloss finish with accurate markings and branding.

 

Boeing F-15A F-15 Eagle 1150 Scale Diecast Metal Model

Boeing F-15A (F-15) Eagle 1/150 Scale Diecast Metal Model

Boeing F-15A (F-15) Eagle 1/150 Scale Diecast Metal Model - 25″ wingspan 3. The box measures 6″ x 6″ x 3″. Although it is a small scale, the details are very impressive. The maker of the model, model power, really did a good job with the model, the panel lines and details are very clear and crisp. The box is labeled as adult collectible model and recommends 14 and older. 1150 scale diecast metal, boeing f-15a (f-15) eagle, length 5. Look at the photos and you will see very clear and crisp nose art and markings. 5″ this eagle model is made to be displayed in the inflight configuration. There are very few gaps and/or joints in this model. Since there is no option for a landing gear, a stand where the model can be attached for display is included and the model’s info (type of airplane and scale). It is certainly not a toy and will not survive been played with or a fall. From the photos one can see and appreciate the transparent cockpit windshield. What really caught my attention, however, is the way the markings and coloring. It is mostly made of metal and very heavy/dense. The engines are part of the wing assembly, which in turn is one single piece.

 

Volkswagen - VW - T1 Delivery Bus Van 124 Scale Diecast Metal Model - REDBLACK

Volkswagen – VW – T1 Delivery Bus Van 1/24 Scale Diecast Metal Model – RED/BLACK

Volkswagen – VW – T1 Delivery Bus Van 1/24 Scale Diecast Metal Model – RED/BLACK - So they will be shipped wrapped in packing material (they will be better protected than an in an individual window box). This vw bus measures 6. 124 scale diecast collectible model car. . The seats/benches inside are visible and molded quite accurately. 5″ wide and 3″ high. 1963 volkswagen classical t1 type 2 bus. These are not the models that come in individual window box. 75″ long, 2. It has openable rear hatch. The headlights, side view mirrors and bumpers add nice and realistic details. Hub cabs have the vw logo embossed and the tires are made of rubber. The models we have are the ones that come in a display tray box of 4 models per box (the type of box that would be on a counter in a store).